Induktivitäten nutzen den Effekt der Selbstinduktion und werden mit zunehmender Frequenz hochohmiger. Sie eignen sich somit als Filterbauelement für die Glättung, Entkoppelung und Entstörung.
Gerne entwickeln wir gemeinsam mit unseren Partnern und unserem Know-How die optimale Induktivität für Ihre Anwendung. Nutzen Sie hierzu unser Formblatt "Induktivitäten" und für eine unverbindliche Anfrage. Mit dem Formblat "Wickelgüter" können Sie gemäß einer bestehenden Vorschrift eine Induktivtät anfragen.
Verfügbare Hersteller
Themen
Nanokristalline Drosseln
Nanokristallines Kernmaterial verfügt über eine hohe Permeabilität und hat interessante Sättigungseigenschaften. Als Grundlage für Drosseln im Leistungsbereich und für EMV-Anwendungen können Potentiale in Miniaturisierung und verbesserten Leistungsdaten im Vergleich zu Ferritkernen realisiert werden.
News
Produktneuheit
08. Oktober 2019
TT Electronic: Low-Profile-Induktivität für hohe Schaltfrequenzen
Die Serie HM66 ist für Schaltfrequenzen bis 4MHz optimiert und zeichnet sich durch geringe Verluste aus.
Produktneuheit
07. August 2019
Günstige SMD Induktivität HM79M für mittlere Leistungen von TT Electronics
Die Induktivität zeichnet sich durch geringe Verluste mit der Verwendung eines Ferritkernes aus.
Produktneuheit
07. November 2018
Geschirmte Induktivität HM72L bis 44A und Hochfrequenztauglichkeit von TT Electronics
Die HM72L Serie wurde mit den neuesten Materialien entwickelt, um die Induktivität, das Temperaturverhalten, die Strombelastbarkeit zu verbessern und gleichzeitig die Bauform und den D-C-Widerstand zu verrringern.
Produktneuheit
24. September 2018
Extrem flache Power Induktivität in kleiner Bauform von NIC
Die Serie NPIM_LP richtet sich an Applikationen mit sehr restriktiven Anforderungen an die maximale Höhe der Bauelemente.
Empfohlene Produkte
Unser Angebot: Speicherdrosseln nach Wunsch
Mit den breitgefächerten Spezialisierungen unserer Partner können wir das passende Bauelement konstruieren lassen.
Miniaturisierung gepaart mit stabilem Verhalten: Induktivitäten aus Metalllegierung mit hoher Strombelastbarkeit von Murata
In Kernen aus Metalllegierung werden kleinste Luftspalte eingebracht und dadurch ein sanfteres Sättigungsverhalten der Induktivität erzeugt.
Manfred Schmelzer: Übertrager und Induktivitäten mit FIW Drähten
Mit der Verwendung von "Fully Insulated Wires" (FIW) kann die Performance von Übertragern und Induktivitäten gesteigert und die Fertigungskosten gesenkt werden.
Verfügbare Muster
| Artikelnummer | Beschreibung | Hersteller | Stückzahl | ||
|---|---|---|---|---|---|
|
|
B82422A1102K100-M | SMD Spule 1210 1uH 380mA 10%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82422A1103K100-M | SMD Spule 1210 10uH 180mA 10%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82422A1104K100-M | SMD Spule 1210 100uH 65mA 10%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82422A1152K100-M | SMD Spule 1210 1,5uH 340mA 10%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82422A1153K100-M | SMT-INDUCTOR 1210 15 UH 10%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82422A1222K100-M | SMD Spule 1210 2,2uH 270mA 10%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82422A1223K100-M | SMD Spule 1210 22uH 140mA 10%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82422A1332K100-M | SMD Spule 1210 3,3uH 200mA 10%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82422A1333K100-M | SMD Spule 1210 33uH 105mA 10%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82422A1472K100-M | SMD Spule 1210 4,7uH 150mA 10%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82422A1473K100-M | SMD Spule 1210 47uH 85mA 10%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82422A1682K100-M | SMD Spule 1210 6,8uH 135mA 10%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82422A1683K100-M | SMD Spule 1210 68uH 80mA 10%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82422A3101K100-M | SMD Spule 1210 100nH 440mA 10%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82422A3150K100-M | SMT-INDUCTOR 1210 0,015 UH 10%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82422A3151K100-M | SMD-SPULE 1210 150NH 390MA 10%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82422A3220K100-M | SMD Spule 1210 22nH 600mA 10%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82422A3221K100-M | SMD Spule 1210 220nH 360mA 10%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82422A3330K100-M | SMD Spule 1210 33nH 200mA 10%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82422A3331K100-M | SMT-INDUCTOR 1210 0,33 UH 10%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82422A3470K100-M | SMD Spule 1210 47nH 510mA 10%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82422A3471K100-M | SMD Spule 1210 470nH 150mA 10%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82422A3680K100-M | SMD Spule 1210 68nH 600mA 10%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82422A3681K100-M | SMD Spule 1210 680nH 145mA 10%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82422H1102K000-M | SMT-INDUCTOR 1210-H 1 UH 10%, Muster | Epcos | 45 | Muster anfordern |
|
|
B82422H1103K000-M | SMT-INDUCTOR 1210-H 10 UH 10%, Muster | Epcos | 45 | Muster anfordern |
|
|
B82422H1104K000-M | SMT-INDUCTOR 1210-H 100 UH 10%, Muster | Epcos | 45 | Muster anfordern |
|
|
B82422H1152K000-M | SMT-INDUCTOR 1210-H 1,5 UH 10%, Muster | Epcos | 45 | Muster anfordern |
|
|
B82422H1153K000-M | SMT-INDUCTOR 1210-H 15 UH 10%, Muster | Epcos | 45 | Muster anfordern |
|
|
B82422H1154K000-M | SMT-INDUCTOR 1210-H 150 UH 10%, Muster | Epcos | 45 | Muster anfordern |
|
|
B82422H1222K000-M | SMT-INDUCTOR 1210-H 2,2 UH 10%, Muster | Epcos | 45 | Muster anfordern |
|
|
B82422H1223K000-M | SMT-INDUCTOR 1210-H 22 UH 10%, Muster | Epcos | 45 | Muster anfordern |
|
|
B82422H1224K000-M | SMT-INDUCTOR 1210-H 220 UH 10%, Muster | Epcos | 45 | Muster anfordern |
|
|
B82422H1332K000-M | SMD Spule 1210 3,3uH 10%, Muster | Epcos | 45 | Muster anfordern |
|
|
B82422H1333K000-M | SMT-INDUCTOR 1210-H 33 UH 10%, Muster | Epcos | 45 | Muster anfordern |
|
|
B82422H1334K000-M | SMT-INDUCTOR 1210-H 330 UH 10%, Muster | Epcos | 45 | Muster anfordern |
|
|
B82422H1472K000-M | SMT-INDUCTOR 1210-H 4,7 UH 10%, Muster | Epcos | 45 | Muster anfordern |
|
|
B82422H1473K000-M | SMT-INDUCTOR 1210-H 47 UH 10%, Muster | Epcos | 45 | Muster anfordern |
|
|
B82422H1474K000-M | SMT-INDUCTOR 1210-H 470 UH 10%, Muster | Epcos | 45 | Muster anfordern |
|
|
B82422H1682K000-M | SMT-INDUCTOR 1210-H 6,8 UH 10%, Muster | Epcos | 45 | Muster anfordern |
|
|
B82422H1683K000-M | SMT-INDUCTOR 1210-H 68 UH 10%, Muster | Epcos | 45 | Muster anfordern |
|
|
B82422H1684K000-M | SMT-INDUCTOR 1210-H 680 UH 10%, Muster | Epcos | 45 | Muster anfordern |
|
|
B82422T1102K000-M | SMT-INDUCTOR 1210 1 UH 10%, Muster | Epcos | 30 | Muster anfordern |
|
|
B82422T1103K000-M | SMT-INDUCTOR 1210 10 UH 10%, Muster | Epcos | 30 | Muster anfordern |
|
|
B82422T1104K000-M | SMT-INDUCTOR 1210 100 UH 10%, Muster | Epcos | 30 | Muster anfordern |
|
|
B82422T1151K000-M | SMT-INDUCTOR 1210 0,15 UH 10%, Muster | Epcos | 30 | Muster anfordern |
|
|
B82422T1152K000-M | SMT-INDUCTOR 1210 1,5 UH 10%, Muster | Epcos | 30 | Muster anfordern |
|
|
B82422T1153K000-M | SMT-INDUCTOR 1210 15 UH 10%, Muster | Epcos | 30 | Muster anfordern |
|
|
B82422T1221K000-M | SMT-INDUCTOR 1210 0,22 UH 10%, Muster | Epcos | 30 | Muster anfordern |
|
|
B82422T1222K000-M | SMT-INDUCTOR 1210 2,2 UH 10%, Muster | Epcos | 30 | Muster anfordern |
|
|
B82422T1223K000-M | SMT-INDUCTOR 1210 22 UH 10%, Muster | Epcos | 30 | Muster anfordern |
|
|
B82422T1331K000-M | SMD Spule 1210 0,33µH 390mA 10%, Muster | Epcos | 30 | Muster anfordern |
|
|
B82422T1332K000-M | SMT-INDUCTOR 1210 3,3 UH 10%, Muster | Epcos | 30 | Muster anfordern |
|
|
B82422T1333K000-M | SMT-INDUCTOR 1210 33 UH 10%, Muster | Epcos | 30 | Muster anfordern |
|
|
B82422T1471K000-M | SMT-INDUCTOR 1210 0,47 UH 10%, Muster | Epcos | 30 | Muster anfordern |
|
|
B82422T1472K000-M | SMT-INDUCTOR 1210 4,7 UH 10%, Muster | Epcos | 30 | Muster anfordern |
|
|
B82422T1473K000-M | SMT-INDUCTOR 1210 47 UH 10%, Muster | Epcos | 30 | Muster anfordern |
|
|
B82422T1681K000-M | SMT-INDUCTOR 1210 0,68 UH 10%, Muster | Epcos | 30 | Muster anfordern |
|
|
B82422T1682K000-M | SMT-INDUCTOR 1210 6,8 UH 10%, Muster | Epcos | 30 | Muster anfordern |
|
|
B82422T1683K000-M | SMT-INDUCTOR 1210 68 UH 10%, Muster | Epcos | 30 | Muster anfordern |
|
|
B82422T3101K000-M | SMT-INDUCTOR 1210 0,1 UH 10%, Muster | Epcos | 30 | Muster anfordern |
|
|
B82422T3150K000-M | SMT-INDUCTOR 1210 0,015 UH 10%, Muster | Epcos | 30 | Muster anfordern |
|
|
B82422T3220K000-M | SMT-INDUCTOR 1210 0,022 UH 10%, Muster | Epcos | 30 | Muster anfordern |
|
|
B82422T3330K000-M | SMT-INDUCTOR 1210 0,033 UH 10%, Muster | Epcos | 30 | Muster anfordern |
|
|
B82422T3470K000-M | SMT-INDUCTOR 1210 0,047 UH 10%, Muster | Epcos | 30 | Muster anfordern |
|
|
B82422T3680K000-M | SMT-INDUCTOR 1210 0,068 UH 10%, Muster | Epcos | 30 | Muster anfordern |
|
|
B82432C1102K000-M | SMT-INDUCTOR 1812 1 UH 10%, Muster | Epcos | 5 | Muster anfordern |
|
|
B82432C1103K000-M | SMT-INDUCTOR 1812 10 UH 10%, Muster | Epcos | 5 | Muster anfordern |
|
|
B82432C1104K000-M | SMD Spule 1812 100uH 145mA 10%, Muster | Epcos | 5 | Muster anfordern |
|
|
B82432C1105K000-M | SMT-INDUCTOR 1812 1000 UH 10%, Muster | Epcos | 5 | Muster anfordern |
|
|
B82432C1152K000-M | SMT-INDUCTOR 1812 1,5UH 10%, Muster | Epcos | 5 | Muster anfordern |
|
|
B82432C1153K000-M | SMT-INDUCTOR 1812 15 UH 10%, Muster | Epcos | 5 | Muster anfordern |
|
|
B82432C1154K000-M | SMT-INDUCTOR 1812 150 UH 10%, Muster | Epcos | 5 | Muster anfordern |
|
|
B82432C1182K000-M | SMT-INDUCTOR 1812 1,8UH 10%, Muster | Epcos | 5 | Muster anfordern |
|
|
B82432C1183K000-M | SMT-INDUCTOR 1812 18 UH 10%, Muster | Epcos | 5 | Muster anfordern |
|
|
B82432C1222K000-M | SMT-INDUCTOR 1812 2,2UH 10%, Muster | Epcos | 5 | Muster anfordern |
|
|
B82432C1223K000-M | SMD Spule 1812 22 UH 10%, Muster | Epcos | 5 | Muster anfordern |
|
|
B82432C1224K000-M | SMD-SPULE 1812 220UH 10%, Muster | Epcos | 5 | Muster anfordern |
|
|
B82432C1332K000-M | SMT-INDUCTOR 1812 3,3UH 10%, Muster | Epcos | 5 | Muster anfordern |
|
|
B82432C1333K000-M | SMD Spule 1812 33uH 230mA 10%, Muster | Epcos | 5 | Muster anfordern |
|
|
B82432C1334K000-M | SMD-SPULE 1812 330UH 85MA 10%, Muster | Epcos | 5 | Muster anfordern |
|
|
B82432C1392K000-M | SMT-INDUCTOR 1812 3,9UH 10%, Muster | Epcos | 5 | Muster anfordern |
|
|
B82432C1393K000-M | SMT-INDUCTOR 1812 39 UH 10%, Muster | Epcos | 5 | Muster anfordern |
|
|
B82432C1472K000-M | SMD-SPULE 1812 4,7UH 390MA 10%, Muster | Epcos | 5 | Muster anfordern |
|
|
B82432C1473K000-M | SMT-INDUCTOR 1812 47 UH 10%, Muster | Epcos | 5 | Muster anfordern |
|
|
B82432C1474K000-M | SMT-INDUCTOR 1812 470 UH 10%, Muster | Epcos | 5 | Muster anfordern |
|
|
B82432C1682K000-M | SMT-INDUCTOR 1812 6,8UH 10%, Muster | Epcos | 5 | Muster anfordern |
|
|
B82432C1683K000-M | SMT-INDUCTOR 1812 68 UH 10%, Muster | Epcos | 5 | Muster anfordern |
|
|
B82432C1684K000-M | SMT-INDUCTOR 1812 680 UH 10%, Muster | Epcos | 5 | Muster anfordern |
|
|
B82432C1822K000-M | SMT-INDUCTOR 1812 8,2UH 10%, Muster | Epcos | 5 | Muster anfordern |
|
|
B82432T1102K000-M | SMT-INDUCTOR 1812 1 UH 10%, Muster | Epcos | 18 | Muster anfordern |
|
|
B82432T1103K000-M | SMT-INDUCTOR 1812 10 UH 10%, Muster | Epcos | 18 | Muster anfordern |
|
|
B82432T1104K000-M | SMD Spule 1812 100uH 10%, Muster | Epcos | 18 | Muster anfordern |
|
|
B82432T1105K000-M | SMT-INDUCTOR 1812 1000 UH 10%, Muster | Epcos | 18 | Muster anfordern |
|
|
B82432T1152K000-M | SMT-INDUCTOR 1812 1,5UH 10%, Muster | Epcos | 18 | Muster anfordern |
|
|
B82432T1153K000-M | SMT-INDUCTOR 1812 15 UH 10%, Muster | Epcos | 18 | Muster anfordern |
|
|
B82432T1154K000-M | SMD Spule 1812 150uH 10%, Muster | Epcos | 18 | Muster anfordern |
|
|
B82432T1182K000-M | SMT-INDUCTOR 1812 1,8UH 10%, Muster | Epcos | 18 | Muster anfordern |
|
|
B82432T1183K000-M | SMT-INDUCTOR 1812 18 UH 10%, Muster | Epcos | 18 | Muster anfordern |
|
|
B82432T1222K000-M | SMD Spule 1812 2,2uH 10%, Muster | Epcos | 18 | Muster anfordern |
|
|
B82432T1223K000-M | SMD Spule 1812 22uH 10%, Muster | Epcos | 18 | Muster anfordern |
|
|
B82432T1224K000-M | SMT-INDUCTOR 1812 220 UH 10%, Muster | Epcos | 18 | Muster anfordern |
|
|
B82432T1332K000-M | SMT-INDUCTOR 1812 3,3UH 10%, Muster | Epcos | 18 | Muster anfordern |
|
|
B82432T1333K000-M | SMT-INDUCTOR 1812 33 UH 10%, Muster | Epcos | 18 | Muster anfordern |
|
|
B82432T1334K000-M | SMT-INDUCTOR 1812 330 UH 10%, Muster | Epcos | 18 | Muster anfordern |
|
|
B82432T1392K000-M | SMT-INDUCTOR 1812 3,9UH 10%, Muster | Epcos | 18 | Muster anfordern |
|
|
B82432T1393K000-M | SMT-INDUCTOR 1812 39 UH 10%, Muster | Epcos | 18 | Muster anfordern |
|
|
B82432T1472K000-M | SMT-INDUCTOR 1812 4,7UH 10%, Muster | Epcos | 18 | Muster anfordern |
|
|
B82432T1473K000-M | SMD Spule 1812 47uH 10%, Muster | Epcos | 18 | Muster anfordern |
|
|
B82432T1474K000-M | SMT-INDUCTOR 1812 470 UH 10%, Muster | Epcos | 18 | Muster anfordern |
|
|
B82432T1682K000-M | SMT-INDUCTOR 1812 6,8UH 10%, Muster | Epcos | 18 | Muster anfordern |
|
|
B82432T1683K000-M | SMT-INDUCTOR 1812 68 UH 10%, Muster | Epcos | 18 | Muster anfordern |
|
|
B82432T1684K000-M | SMD Spule 1812 680uH 10%, Muster | Epcos | 18 | Muster anfordern |
|
|
B82432T1822K000-M | SMT-INDUCTOR 1812 8,2UH 10%, Muster | Epcos | 18 | Muster anfordern |
|
|
B82442A1102K000-M | SMT-INDUCTOR 2220 1 UH 10%, Muster | Epcos | 18 | Muster anfordern |
|
|
B82442A1103K000-M | SMD-SPULE 2220 10UH 690MA 10%, Muster | Epcos | 18 | Muster anfordern |
|
|
B82442A1104K000-M | SMT-INDUCTOR 2220 100 UH 10%, Muster | Epcos | 18 | Muster anfordern |
|
|
B82442A1105K000-M | SMD Spule 2220 1mH 380mA 10%, Muster | Epcos | 18 | Muster anfordern |
|
|
B82442A1106K000-M | SMT-INDUCTOR 2220 10000 UH 10%, Muster | Epcos | 18 | Muster anfordern |
|
|
B82442A1472K000-M | SMT-INDUCTOR 2220 4,7 UH 10%, Muster | Epcos | 18 | Muster anfordern |
|
|
B82442A1473K000-M | SMT-INDUCTOR 2220 47 UH 10%, Muster | Epcos | 18 | Muster anfordern |
|
|
B82442A1474K000-M | SMT-INDUCTOR 2220 470 UH 10%, Muster | Epcos | 18 | Muster anfordern |
|
|
B82442A1475K000-M | SMT-INDUCTOR 2220 4700 UH 10%,, Muster | Epcos | 18 | Muster anfordern |
|
|
B82442H1105K000-M | SMD-Spule 2220 1µH 10%, Muster | Epcos | 18 | Muster anfordern |
|
|
B82442H1334K000-M | SMD-SPULE 2220 330UH 200MA 10%, Muster | Epcos | 18 | Muster anfordern |
|
|
B82464A4102M000-M | SMT-INDUCTOR 10X10 1 UH 6,8 A, Muster | Epcos | 9 | Muster anfordern |
|
|
B82464A4103M000-M | SMT-INDUCTOR 10X10 10 UH 3,4 A, Muster | Epcos | 9 | Muster anfordern |
|
|
B82464A4104K000-M | SMT-INDUCTOR 10X10 100 UH 1,15 A, Muster | Epcos | 9 | Muster anfordern |
|
|
B82464A4105K000-M | SMT-INDUCTOR 10X10 1000 UH 0,3 A, Muster | Epcos | 9 | Muster anfordern |
|
|
B82464A4152M000-M | SMT-INDUCTOR 10X10 1,5UH 6,4 A, Muster | Epcos | 9 | Muster anfordern |
|
|
B82464A4153K000-M | SMT-INDUCTOR 10X10 15 UH 2,8 A, Muster | Epcos | 9 | Muster anfordern |
|
|
B82464A4222M000-M | SMT-INDUCTOR 10X10 2,2UH 6,0 A, Muster | Epcos | 9 | Muster anfordern |
|
|
B82464A4223K000-M | SMT-INDUCTOR 10X10 22 UH 2,5 A, Muster | Epcos | 9 | Muster anfordern |
|
|
B82464A4224K000-M | SMT-INDUCTOR 10X10 220 UH 0,8 A, Muster | Epcos | 9 | Muster anfordern |
|
|
B82464A4332M000-M | SMT-INDUCTOR 10X10 3,3UH 5,2 A, Muster | Epcos | 9 | Muster anfordern |
|
|
B82464A4333K000-M | SMT-INDUCTOR 10X10 33 UH 1,9 A, Muster | Epcos | 9 | Muster anfordern |
|
|
B82464A4472M000-M | SMT-INDUCTOR 10X10 4,7UH 4,7 A, Muster | Epcos | 9 | Muster anfordern |
|
|
B82464A4473K000-M | SMT-INDUCTOR 10X10 47 UH 1,6 A, Muster | Epcos | 9 | Muster anfordern |
|
|
B82464A4474K000-M | SMT-INDUCTOR 10X10 470 UH 0,5 A, Muster | Epcos | 9 | Muster anfordern |
|
|
B82464A4682M000-M | SMT-INDUCTOR 10X10 6,8UH 4,3 A, Muster | Epcos | 9 | Muster anfordern |
|
|
B82464A4683K000-M | SMT-INDUCTOR 10X10 68 UH 1,35 A, Muster | Epcos | 9 | Muster anfordern |
|
|
B82464G4102M000-M | SMT-INDUCTOR 10X10 1,0UH 7,5 A, Muster | Epcos | 9 | Muster anfordern |
|
|
B82464G4103M000-M | SMT-INDUCTOR 10X10 10 UH 2,5 A, Muster | Epcos | 9 | Muster anfordern |
|
|
B82464G4104M000-M | SMD Spule 10X10 100uH 1A 20%, Muster | Epcos | 9 | Muster anfordern |
|
|
B82464G4105M000-M | SMT-INDUCTOR 10X10 1000 UH 0,30 A, Muster | Epcos | 9 | Muster anfordern |
|
|
B82464G4152M000-M | SMT-INDUCTOR 10X10 1,5UH 7,0 A, Muster | Epcos | 9 | Muster anfordern |
|
|
B82464G4153M000-M | SMT-INDUCTOR 10X10 15 UH 2,2 A, Muster | Epcos | 9 | Muster anfordern |
|
|
B82464G4222M000-M | SMT-INDUCTOR 10X10 2,2UH 6,5 A, Muster | Epcos | 9 | Muster anfordern |
|
|
B82464G4223M000-M | SMT-INDUCTOR 10X10 22 UH 1,9 A, Muster | Epcos | 9 | Muster anfordern |
|
|
B82464G4224M000-M | SMD Spule 10X10 220uH 0,65A 20%, Muster | Epcos | 9 | Muster anfordern |
|
|
B82464G4332M000-M | SMT-INDUCTOR 10X10 3,3UH 5,5 A, Muster | Epcos | 9 | Muster anfordern |
|
|
B82464G4333M000-M | SMT-INDUCTOR 10X10 33 UH 1,6 A, Muster | Epcos | 9 | Muster anfordern |
|
|
B82464G4472M000-M | SMT-INDUCTOR 10X10 4,7UH 4,9 A, Muster | Epcos | 9 | Muster anfordern |
|
|
B82464G4473M000-M | SMT-INDUCTOR 10X10 47 UH 1,4 A, Muster | Epcos | 9 | Muster anfordern |
|
|
B82464G4474M000-M | SMT-INDUCTOR 10X10 470 UH 0,47 A, Muster | Epcos | 9 | Muster anfordern |
|
|
B82464G4682M000-M | SMT-INDUCTOR 10X10 6,8UH 4,3 A, Muster | Epcos | 9 | Muster anfordern |
|
|
B82464G4683M000-M | SMT-INDUCTOR 10X10 68 UH 1,2 A, Muster | Epcos | 9 | Muster anfordern |
|
|
B82471A1103M000-M | SMT-INDUCTOR 6X 5 10 UH 1,44 A, Muster | Epcos | 6 | Muster anfordern |
|
|
B82471A1104K000-M | SMD Inductor 6x15 100µH 0,52A, Muster | Epcos | 6 | Muster anfordern |
|
|
B82471A1223M000-M | SMD Inductor 6x5 22µH 1,11A, Muster | Epcos | 6 | Muster anfordern |
|
|
B82471A1224K000-M | SMT-INDUCTOR 6X 5 220 UH 0,35 A, Muster | Epcos | 6 | Muster anfordern |
|
|
B82471A1473M000-M | SMD Inductor 6,1x5,6 47µH 0,72A, Muster | Epcos | 6 | Muster anfordern |
|
|
B82472G4103M000-M | SMT-INDUCTOR 7X 7 10 UH 1,34 A, Muster | Epcos | 6 | Muster anfordern |
|
|
B82472G4104M000-M | SMT-INDUCTOR 7X 7 100 UH 0,45 A, Muster | Epcos | 6 | Muster anfordern |
|
|
B82472G4223M000-M | SMD Inductor 7,3x7,3 22µH 1,1A, Muster | Epcos | 6 | Muster anfordern |
|
|
B82472G4224M000-M | SMT-INDUCTOR 7X 7 220 UH 0,30 A, Muster | Epcos | 6 | Muster anfordern |
|
|
B82472G4473M000-M | SMT-INDUCTOR 7X 7 47 UH 0,65 A, Muster | Epcos | 6 | Muster anfordern |
|
|
B82472G6103M000-M | SMT-INDUCTOR 7X 7 10 UH 1,90 A, Muster | Epcos | 6 | Muster anfordern |
|
|
B82472G6104M000-M | SMT-INDUCTOR 7X 7 100 UH 0,67 A, Muster | Epcos | 6 | Muster anfordern |
|
|
B82472G6223M000-M | SMT-INDUCTOR 7X 7 22 UH 1,45 A, Muster | Epcos | 6 | Muster anfordern |
|
|
B82472G6224M000-M | SMT-INDUCTOR 7X 7 220 UH 0,42 A, Muster | Epcos | 6 | Muster anfordern |
|
|
B82472G6473M000-M | SMT-INDUCTOR 7X 7 47 UH 1,0 A, Muster | Epcos | 6 | Muster anfordern |
|
|
B82473A1103K000-M | SMT-INDUCTOR 8X 7 10 UH 2,30 A, Muster | Epcos | 6 | Muster anfordern |
|
|
B82473A1104K000-M | SMT-INDUCTOR 8X 7 100 UH 0,72 A, Muster | Epcos | 6 | Muster anfordern |
|
|
B82473A1223K000-M | SMT-INDUCTOR 8X 7 22 UH 1,50 A, Muster | Epcos | 6 | Muster anfordern |
|
|
B82473A1224K000-M | SMT-INDUCTOR 8X 7 220 UH 0,49 A, Muster | Epcos | 6 | Muster anfordern |
|
|
B82473A1473K000-M | SMT-INDUCTOR 8X 7 47 UH 1,10 A, Muster | Epcos | 6 | Muster anfordern |
|
|
B82475A1103M000-M | SMT-INDUCTOR 10X 9 10 UH 2,60 A, Muster | Epcos | 6 | Muster anfordern |
|
|
B82475A1104K000-M | SMT-INDUCTOR 10X 9 100 UH 0,97 A, Muster | Epcos | 6 | Muster anfordern |
|
|
B82475A1223M000-M | SMT-INDUCTOR 10X 9 22 UH 1,95 A, Muster | Epcos | 6 | Muster anfordern |
|
|
B82475A1224K000-M | SMT-INDUCTOR 10X 9 220 UH 0,66 A, Muster | Epcos | 6 | Muster anfordern |
|
|
B82475A1473K000-M | SMT-INDUCTOR 10X 9 47 UH 1,28 A, Muster | Epcos | 6 | Muster anfordern |
|
|
B82476A1103M000-M | SMT-INDUCTOR 13X 9 10 UH 3,90 A, Muster | Epcos | 4 | Muster anfordern |
|
|
B82476A1104M000-M | SMD-Spule 13x9,4 100µH 1.3A 20%, Muster | Epcos | 4 | Muster anfordern |
|
|
B82476A1223M000-M | SMT-INDUCTOR 13X 9 22 UH 2,70 A, Muster | Epcos | 4 | Muster anfordern |
|
|
B82476A1224M000-M | SMT-INDUCTOR 13X 9 220 UH 0,8 A, Muster | Epcos | 4 | Muster anfordern |
|
|
B82476A1473M000-M | SMT-INDUCTOR 13X 9 47 UH 1,80 A, Muster | Epcos | 4 | Muster anfordern |
|
|
B82477G2103M000-M | SMT-INDUCTOR 12X12 10,0UH 4,00 A, Muster | Epcos | 4 | Muster anfordern |
|
|
B82477G2104M000-M | SMT-INDUCTOR 100UH 1,30 A, Muster | Epcos | 4 | Muster anfordern |
|
|
B82477G2223M000-M | SMT-INDUCTOR 22 UH 2,80 A, Muster | Epcos | 4 | Muster anfordern |
|
|
B82477G2224M000-M | SMT-INDUCTOR 220UH 0,80 A, Muster | Epcos | 4 | Muster anfordern |
|
|
B82477G2473M000-M | SMT-INDUCTOR 47 UH 1,80 A, Muster | Epcos | 4 | Muster anfordern |
|
|
B82477G4103M000-M | SMT-INDUCTOR 12X12 10,0 UH 5,40 A , Muster | Epcos | 4 | Muster anfordern |
|
|
B82477G4104M000-M | SMT-INDUCTOR 12X12 100,0 UH 1,70 A, Muster | Epcos | 4 | Muster anfordern |
|
|
B82477G4223M000-M | SMT-INDUCTOR 12X12 22,0 UH 3,60 A, Muster | Epcos | 4 | Muster anfordern |
|
|
B82477G4224M000-M | SMT-INDUCTOR 12X12 220,0 UH 1,16 A, Muster | Epcos | 4 | Muster anfordern |
|
|
B82477G4473M000-M | SMT-INDUCTOR 12X12 47,0 UH 2,50 A, Muster | Epcos | 4 | Muster anfordern |
|
|
B82479A1103M000-M | SMT-INDUCTOR 19X15 10 UH 4,30 A, Muster | Epcos | 4 | Muster anfordern |
|
|
B82479A1104M000-M | SMT-INDUCTOR 19X15 100 UH 1,80 A, Muster | Epcos | 4 | Muster anfordern |
|
|
B82479A1223M000-M | SMT-INDUCTOR 19X15 22 UH 3,50 A, Muster | Epcos | 4 | Muster anfordern |
|
|
B82479A1224M000-M | SMT-INDUCTOR 19X15 220 UH 1,20 A, Muster | Epcos | 4 | Muster anfordern |
|
|
B82479A1473M000-M | SMT-INDUCTOR 19X15 47UH 2,60A, Muster | Epcos | 4 | Muster anfordern |
|
|
B82479G1103M000-M | SMT-INDUCTOR 19X15 10UH 4.30A, Muster | Epcos | 4 | Muster anfordern |
|
|
B82479G1104M000-M | SMT-INDUCTOR 19X15 100UH 1.80A, Muster | Epcos | 4 | Muster anfordern |
|
|
B82479G1223M000-M | SMT-INDUCTOR 19x15 22UH 3.10A, Muster | Epcos | 4 | Muster anfordern |
|
|
B82479G1224M000-M | SMT-INDUCTOR 19X15 220UH 1.2A, Muster | Epcos | 4 | Muster anfordern |
|
|
B82479G1473M000-M | SMT-INDUCTOR 19X15 47 UH 2,40 A, Muster | Epcos | 4 | Muster anfordern |
|
|
B82496C3100J000-M | SMT-INDUCTOR 0603 10 NH 5%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82496C3101J000-M | SMT-INDUCTOR 0603 100 NH 5%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82496C3120J000-M | SMT-INDUCTOR 0603 12 NH 5%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82496C3150J000-M | SMD Spule 0603 15nH 5%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82496C3159A000-M | SMT-INDUCTOR 0603 1,5 NH 0,3NH, Muster | Epcos | 60 | Muster anfordern |
|
|
B82496C3180J000-M | SMD Spule 0603 18nH 5%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82496C3189A000-M | SMT-INDUCTOR 0603 1,8 NH 0,3NH, Muster | Epcos | 60 | Muster anfordern |
|
|
B82496C3220J000-M | SMD Spule 0603 22nH 800mA 5%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82496C3221J000-M | SMT-INDUCTOR 0603 220 NH 5%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82496C3229A000-M | SMT-INDUCTOR 0603 2,2 NH 0,3NH, Muster | Epcos | 60 | Muster anfordern |
|
|
B82496C3270J000-M | SMT-INDUCTOR 0603 27 NH 5%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82496C3279A000-M | SMD Spule 0603 2,7nH 800mA +/-0,3nH, Muster | Epcos | 60 | Muster anfordern |
|
|
B82496C3330J000-M | SMT-INDUCTOR 0603 33 NH 5%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82496C3339A000-M | SMT-INDUCTOR 0603 3,3 NH 0,3NH, Muster | Epcos | 60 | Muster anfordern |
|
|
B82496C3390J000-M | SMT-INDUCTOR 0603 39 NH 5%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82496C3399J000-M | SMT-INDUCTOR 0603 3,9 NH 5%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82496C3470J000-M | SMD Spule 0603 47nH 800mA 5%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82496C3479J000-M | SMD Spule 0603 4,7nH 800mA 5%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82496C3560J000-M | SMT-INDUCTOR 0603 56 NH 5%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82496C3569J000-M | SMT-INDUCTOR 0603 5,6 NH 5%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82496C3680J000-M | SMT-INDUCTOR 0603 68 NH 5%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82496C3689J000-M | SMT-INDUCTOR 0603 6,8 NH 5%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82496C3820J000-M | SMT-INDUCTOR 0603 82 NH 5%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82496C3829J000-M | SMD Spule 0603 8,2nH 5%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82498F3100J000-M | SMT-INDUCTOR 0805 10 NH 5%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82498F3101J000-M | SMT-INDUCTOR 0805 100 NH 5%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82498F3120J000-M | SMT-INDUCTOR 0805 12 NH 5%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82498F3121J000-M | SMT-INDUCTOR 0805 120 NH 5%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82498F3150J000-M | SMT-INDUCTOR 0805 15 NH 5%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82498F3151J000-M | SMT-INDUCTOR 0805 150 NH 5%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82498F3180J000-M | SMT-INDUCTOR 0805 18 NH 5%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82498F3220J000-M | SMT-INDUCTOR 0805 22 NH 5%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82498F3221J000-M | SMT-INDUCTOR 0805 220 NH 5%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82498F3270J000-M | SMT-INDUCTOR 0805 27 NH 5%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82498F3279K000-M | SMT-INDUCTOR 0805 2,7 NH 10%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82498F3330J000-M | SMT-INDUCTOR 0805 33 NH 5%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82498F3331J000-M | SMT-INDUCTOR 0805 330 NH 5%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82498F3390J000-M | SMT-INDUCTOR 0805 39 NH 5%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82498F3470J000-M | SMT-INDUCTOR 0805 47 NH 5%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82498F3471J000-M | SMT-INDUCTOR 0805 470 NH 5%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82498F3560J000-M | SMT-INDUCTOR 0805 56 NH 5%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82498F3569K000-M | SMT-INDUCTOR 0805 5,6 NH 10%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82498F3680J000-M | SMT-INDUCTOR 0805 68 NH 5%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82498F3681J000-M | SMT-INDUCTOR 0805 680 NH 5%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82498F3689K000-M | SMT-INDUCTOR 0805 6,8 NH 10%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82498F3820J000-M | SMT-INDUCTOR 0805 82 NH 5%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82498F3821J000-M | SMT-INDUCTOR 0805 820 NH 5%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82498F3829K000-M | SMT-INDUCTOR 0805 8,2 NH 10%, Muster | Epcos | 60 | Muster anfordern |
|
|
B82559A0112A013-M | SMT-INDUCTOR HPI13 1,1 UH 20A, Muster | Epcos | 2 | Muster anfordern |
|
|
B82559A0142A013-M | SMT-INDUCTOR HPI13 1,4 UH 22A, Muster | Epcos | 2 | Muster anfordern |
|
|
B82559A0222A013-M | SMT-INDUCTOR HPI13 2,2 UH 15A, Muster | Epcos | 2 | Muster anfordern |
|
|
B82559A0242A013-M | SMT-INDUCTOR HPI13 2,4 UH 16,5A, Muster | Epcos | 2 | Muster anfordern |
|
|
B82559A0302A013-M | SMT-INDUCTOR HPI13 3,0 UH 13A, Muster | Epcos | 2 | Muster anfordern |
|
|
B82559A0392A013-M | SMT-INDUCTOR HPI13 3,9 UH 12A, Muster | Epcos | 2 | Muster anfordern |
|
|
B82559A0501A013-M | SMT-INDUCTOR HPI13 0,5 UH 30A, Muster | Epcos | 2 | Muster anfordern |
|
|
B82559A0951A013-M | SMT-INDUCTOR HPI13 0,95 UH 25A, Muster | Epcos | 2 | Muster anfordern |
|
|
B82559A1042A025-M | T2620 ERU25 INDUCTOR, Muster | Epcos | 4 | Muster anfordern |
|
|
B82559A2122A025-M | T2135 ERU25 INDUCTOR, Muster | Epcos | 4 | Muster anfordern |
|
|
B82559A3232A025-M | T2815 ERU25 INDUCTOR, Muster | Epcos | 4 | Muster anfordern |
|
|
B82559A3292A025-M | T2136 ERU25 INDUCTOR, Muster | Epcos | 4 | Muster anfordern |
|
|
B82559A4432A025-M | T2621 ERU25 INDUCTOR, Muster | Epcos | 4 | Muster anfordern |
|
|
B82559A5612A025-M | T2137 ERU25 INDUCTOR, Muster | Epcos | 4 | Muster anfordern |
|
|
B82559A6792A025-M | T2622 ERU25 INDUCTOR, Muster | Epcos | 4 | Muster anfordern |
|
|
B82559A7103A025-M | T2138 ERU25 INDUCTOR, Muster | Epcos | 4 | Muster anfordern |
|
DFE18SAN1R0ME0L-M | Inductor Metal Alloy 1µH 2000mA 0,144Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
DFE18SAN1R0MG0L-M | Inductor Metal Alloy 1µH 2100mA 0,128Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE18SANR24ME0L-M | Inductor Metal Alloy 0,24µH 4200mA 0,036Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE18SANR24MG0L-M | Inductor Metal Alloy 0,24µH 4900mA 0,03Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE18SANR47ME0L-M | Inductor Metal Alloy 0,47µH 3100mA 0,064Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE18SANR47MG0L-M | Inductor Metal Alloy 0,47µH 3300mA 0,054Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
DFE201208S-1R0M=P2-M | Inductor Metal Alloy 1µH 2700mA 0,084Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE201208S-1R5M=P2-M | Inductor Metal Alloy 1,5µH 2300mA 0,12Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE201208S-2R2M=P2-M | Inductor Metal Alloy 2,2µH 1800mA 0,204Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE201208S-R47M=P2-M | Inductor Metal Alloy 0,47µH 4000mA 0,042Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
DFE201210S-1R0M=P2-M | Inductor Metal Alloy 1µH 3200mA 0,07Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE201210S-1R5M=P2-M | Inductor Metal Alloy 1,5µH 2700mA 0,096Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE201210S-2R2M=P2-M | Inductor Metal Alloy 2,2µH 2100mA 0,155Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE201210S-R47M=P2-M | Inductor Metal Alloy 0,47µH 4800mA 0,032Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE201610E-100M=P2-M | Inductor Metal Alloy 10µH 1000mA 0,78Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE201610E-1R0M=P2-M | Inductor Metal Alloy 1µH 3600mA 0,057Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE201610E-1R5M=P2-M | Inductor Metal Alloy 1,5µH 2900mA 0,091Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE201610E-2R2M=P2-M | Inductor Metal Alloy 2,2µH 2400mA 0,14Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE201610E-4R7M=P2-M | Inductor Metal Alloy 4,7µH 1600mA 0,288Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE201610E-R24M=P2-M | Inductor Metal Alloy 0,24µH 6300mA 0,02Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE201610E-R33M=P2-M | Inductor Metal Alloy 0,33µH 5500mA 0,026Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE201610E-R47M=P2-M | Inductor Metal Alloy 0,47µH 4800mA 0,032Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE201610P-1R0M=P2-M | Inductor Metal Alloy 1µH 3100mA 0,07Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE201610P-1R5M=P2-M | Inductor Metal Alloy 1,5µH 2500mA 0,11Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE201610P-2R2M=P2-M | Inductor Metal Alloy 2,2µH 2000mA 0,168Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE201610P-R24M=P2-M | Inductor Metal Alloy 0,24µH 5400mA 0,026Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE201610P-R33M=P2-M | Inductor Metal Alloy 0,33µH 4700mA 0,034Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE201610P-R47M=P2-M | Inductor Metal Alloy 0,47µH 4000mA 0,04Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE201612E-1R0M=P2-M | Inductor Metal Alloy 1µH 4000mA 0,048Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE201612E-1R5M=P2-M | Inductor Metal Alloy 1,5µH 3200mA 0,072Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE201612E-2R2M=P2-M | Inductor Metal Alloy 2,2µH 2400mA 0,116Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE201612E-4R7M=P2-M | Inductor Metal Alloy 4,7µH 1800mA 0,252Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE201612E-R24M=P2-M | Inductor Metal Alloy 0,24µH 6600mA 0,019Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE201612E-R33M=P2-M | Inductor Metal Alloy 0,33µH 6300mA 0,021Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE201612E-R47M=P2-M | Inductor Metal Alloy 0,47µH 5500mA 0,026Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
DFE201612P-1R0M=P2-M | Inductor Metal Alloy 1µH 3300mA 0,054Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE201612P-1R5M=P2-M | Inductor Metal Alloy 1,5µH 2700mA 0,095Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE201612P-2R2M=P2-M | Inductor Metal Alloy 2,2µH 2100mA 0,144Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE201612P-R24M=P2-M | Inductor Metal Alloy 0,24µH 6500mA 0,023Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE201612P-R33M=P2-M | Inductor Metal Alloy 0,33µH 5600mA 0,028Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE201612P-R47M=P2-M | Inductor Metal Alloy 0,47µH 4800mA 0,033Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE252007F-1R0M=P2-M | Inductor Metal Alloy 1µH 2800mA 0,085Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE252007F-1R5M=P2-M | Inductor Metal Alloy 1,5µH 2100mA 0,132Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE252007F-2R2M=P2-M | Inductor Metal Alloy 2,2µH 1800mA 0,182Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE252007F-3R3M=P2-M | Inductor Metal Alloy 3,3µH 1500mA 0,275Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE252007F-4R7M=P2-M | Inductor Metal Alloy 4,7µH 1200mA 0,45Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE252007F-R47M=P2-M | Inductor Metal Alloy 0,47µH 3300mA 0,053Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE252008U-100M=P2-M | Inductor Metal Alloy 10µH 1000mA 0,88Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE252008U-1R0M=P2-M | Inductor Metal Alloy 1µH 3500mA 0,07Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE252008U-4R7M=P2-M | Inductor Metal Alloy 4,7µH 1600mA 0,34Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE252008U-R47M=P2-M | Inductor Metal Alloy 0,47µH 4500mA 0,038Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE252010F-100M=P2-M | Inductor Metal Alloy 10µH 1300mA 0,6Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE252010F-1R0M=P2-M | Inductor Metal Alloy 1µH 4100mA 0,048Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE252010F-1R5M=P2-M | Inductor Metal Alloy 1,5µH 3400mA 0,072Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE252010F-2R2M=P2-M | Inductor Metal Alloy 2,2µH 3100mA 0,097Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE252010F-3R3M=P2-M | Inductor Metal Alloy 3,3µH 2200mA 0,17Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE252010F-4R7M=P2-M | Inductor Metal Alloy 4,7µH 1900mA 0,24Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE252010F-R33M=P2-M | Inductor Metal Alloy 0,33µH 6800mA 0,021Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE252010F-R47M=P2-M | Inductor Metal Alloy 0,47µH 6000mA 0,027Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE252010P-1R0M=P2-M | Inductor Metal Alloy 1µH 3800mA 0,054Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE252010P-1R5M=P2-M | Inductor Metal Alloy 1,5µH 3000mA 0,082Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE252010P-2R2M=P2-M | Inductor Metal Alloy 2,2µH 2600mA 0,115Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE252010P-4R7M=P2-M | Inductor Metal Alloy 4,7µH 1700mA 0,27Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE252010P-R33M=P2-M | Inductor Metal Alloy 0,33µH 5700mA 0,029Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE252010P-R47M=P2-M | Inductor Metal Alloy 0,47µH 5000mA 0,035Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE252012F-100M=P2-M | Inductor Metal Alloy 10µH 1400mA 0,48Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE252012F-1R0M=P2-M | Inductor Metal Alloy 1µH 4700mA 0,04Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE252012F-1R5M=P2-M | Inductor Metal Alloy 1,5µH 3800mA 0,058Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE252012F-2R2M=P2-M | Inductor Metal Alloy 2,2µH 3300mA 0,082Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE252012F-3R3M=P2-M | Inductor Metal Alloy 3,3µH 2500mA 0,135Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE252012F-4R7M=P2-M | Inductor Metal Alloy 4,7µH 2100mA 0,19Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE252012F-R33M=P2-M | Inductor Metal Alloy 0,33µH 7600mA 0,019Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE252012F-R47M=P2-M | Inductor Metal Alloy 0,47µH 6700mA 0,023Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE252012P-1R0M=P2-M | Inductor Metal Alloy 1µH 4300mA 0,042Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE252012P-1R5M=P2-M | Inductor Metal Alloy 1,5µH 3500mA 0,06Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE252012P-2R2M=P2-M | Inductor Metal Alloy 2,2µH 3000mA 0,084Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE252012P-3R3M=P2-M | Inductor Metal Alloy 3,3µH 2300mA 0,14Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE252012P-4R7M=P2-M | Inductor Metal Alloy 4,7µH 2000mA 0,2Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE252012P-R33M=P2-M | Inductor Metal Alloy 0,33µH 6600mA 0,023Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE252012P-R47M=P2-M | Inductor Metal Alloy 0,47µH 5700mA 0,027Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE322512F-100M=P2-M | Inductor Metal Alloy 10µH 1700mA 0,324Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE322512F-1R0M=P2-M | Inductor Metal Alloy 1µH 4800mA 0,032Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE322512F-1R5M=P2-M | Inductor Metal Alloy 1,5µH 3900mA 0,048Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE322512F-2R2M=P2-M | Inductor Metal Alloy 2,2µH 3400mA 0,066Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE322512F-4R7M=P2-M | Inductor Metal Alloy 4,7µH 2300mA 0,157Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
|
DFE322512F-R47M=P2-M | Inductor Metal Alloy 0,47µH 6700mA 0,023Ohm, Muster Datenblatt | Murata | 20 | Muster anfordern |
|
FCUL0630-H-R12M=P3-M | Inductor Metal Alloy 7,3x6,6mm 0,12 µH, Muster Datenblatt | Murata | 5 | Muster anfordern |
|
|
FCUL0630-H-R22M=P3-M | Inductor Metal Alloy 7,3x6,6mm 0,22 µH, Muster Datenblatt | Murata | 5 | Muster anfordern |
|
|
FCUL0630-H-R36M=P3-M | Inductor Metal Alloy 7,3x6,6mm 0,36 µH, Muster Datenblatt | Murata | 5 | Muster anfordern |
|
|
FCUL0630-H-R47M=P3-M | Inductor Metal Alloy 7,3x6,6mm 0,47 µH, Muster Datenblatt | Murata | 5 | Muster anfordern |
|
|
FCUL0630-H-R56M=P3-M | Inductor Metal Alloy 7,3x6,6mm 0,56 µH, Muster Datenblatt | Murata | 5 | Muster anfordern |
|
|
FCUL0630-H-R68M=P3-M | Inductor Metal Alloy 7,3x6,6mm 0,68 µH, Muster Datenblatt | Murata | 5 | Muster anfordern |
|
|
FCUL1040-H-R18M=P3-M | Inductor Metal Alloy 11,5x10,0mm 0,18 µH, Muster Datenblatt | Murata | 4 | Muster anfordern |
|
|
FCUL1040-H-R36M=P3-M | Inductor Metal Alloy 11,5x10,0mm 0,36 µH, Muster Datenblatt | Murata | 4 | Muster anfordern |
|
|
FCUL1040-H-R42M=P3-M | Inductor Metal Alloy 11,5x10,0mm 0,42 µH, Muster Datenblatt | Murata | 4 | Muster anfordern |
|
|
FCUL1060-H-R36M=P3-M | Inductor Metal Alloy 11,6x10,0mm 0,36 µH, Muster Datenblatt | Murata | 4 | Muster anfordern |
|
|
FCUL1060-H-R56M=P3-M | Inductor Metal Alloy 11,6x10,0mm 0,56 µH, Muster Datenblatt | Murata | 4 | Muster anfordern |
|
LQG15HS10NG02D-M | Inductors 0402 Multilayer Type for Air-core Inductors, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG15HS12NG02D-M | Inductors 0402 Multilayer Type for Air-core Inductors, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG15HS15NG02D-M | Inductors 0402 Multilayer Type for Air-core Inductors, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG15HS18NG02D-M | Inductors 0402 Multilayer Type for Air-core Inductors, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG15HS1N0B02D-M | Inductors 0402 Multilayer Type for Air-core Inductors, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG15HS1N1B02D-M | Inductors 0402 Multilayer Type for Air-core Inductors, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG15HS1N2B02D-M | Inductors 0402 Multilayer Type for Air-core Inductors, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG15HS1N3B02D-M | Inductors 0402 Multilayer Type for Air-core Inductors, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG15HS1N5B02D-M | Inductors 0402 Multilayer Type for Air-core Inductors, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG15HS1N6B02D-M | Inductors 0402 Multilayer Type for Air-core Inductors, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG15HS1N8B02D-M | Inductors 0402 Multilayer Type for Air-core Inductors, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG15HS22NG02D-M | Inductors 0402 Multilayer Type for Air-core Inductors, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG15HS27NG02D-M | Inductors 0402 Multilayer Type for Air-core Inductors, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG15HS2N0B02D-M | Inductors 0402 Multilayer Type for Air-core Inductors, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG15HS2N2B02D-M | Inductors 0402 Multilayer Type for Air-core Inductors, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG15HS2N4B02D-M | Inductors 0402 Multilayer Type for Air-core Inductors, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG15HS2N7B02D-M | Inductors 0402 Multilayer Type for Air-core Inductors, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG15HS33NG02D-M | Inductors 0402 Multilayer Type for Air-core Inductors, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG15HS39NG02D-M | Inductors 0402 Multilayer Type for Air-core Inductors, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG15HS3N0B02D-M | Inductors 0402 Multilayer Type for Air-core Inductors, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG15HS3N3B02D-M | Inductors 0402 Multilayer Type for Air-core Inductors, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG15HS3N6B02D-M | Inductors 0402 Multilayer Type for Air-core Inductors, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG15HS3N9B02D-M | Inductors 0402 Multilayer Type for Air-core Inductors, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG15HS47NG02D-M | Inductors 0402 Multilayer Type for Air-core Inductors, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG15HS4N3B02D-M | Inductors 0402 Multilayer Type for Air-core Inductors, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG15HS4N7B02D-M | Inductors 0402 Multilayer Type for Air-core Inductors, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG15HS56NG02D-M | Inductors 0402 Multilayer Type for Air-core Inductors, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG15HS5N1B02D-M | Inductors 0402 Multilayer Type for Air-core Inductors, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG15HS5N6B02D-M | Inductors 0402 Multilayer Type for Air-core Inductors, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG15HS68NG02D-M | Inductors 0402 Multilayer Type for Air-core Inductors, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG15HS6N2B02D-M | Inductors 0402 Multilayer Type for Air-core Inductors, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG15HS6N8G02D-M | Inductors 0402 Multilayer Type for Air-core Inductors, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG15HS7N5G02D-M | Inductors 0402 Multilayer Type for Air-core Inductors, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG15HS82NG02D-M | Inductors 0402 Multilayer Type for Air-core Inductors, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG15HS8N2G02D-M | Inductors 0402 Multilayer Type for Air-core Inductors, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG15HS9N1G02D-M | Inductors 0402 Multilayer Type for Air-core Inductors, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG15HSR10G02D-M | Inductors 0402 Multilayer Type for Air-core Inductors, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG15HSR12G02D-M | Inductors 0402 Multilayer Type for Air-core Inductors, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG15HSR15G02D-M | Inductors 0402 Multilayer Type for Air-core Inductors, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG15HSR18G02D-M | Inductors 0402 Multilayer Type for Air-core Inductors, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG15HSR22G02D-M | Inductors 0402 Multilayer Type for Air-core Inductors, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG15HSR27G02D-M | Inductors 0402 Multilayer Type for Air-core Inductors, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG18HN10NJ00D-M | SMD Spule 0603 10nH 300mA 5%, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG18HN12NJ00D-M | SMD-SPULE 0603 12NH 300MA 5%, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG18HN15NJ00D-M | SMD Spule 0603 15nH 300mA 5%, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG18HN18NJ00D-M | Inductors 0603 Multilayer Type for Air-core Inductors, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG18HN1N2S00D-M | SMD Spule 0603 1,2nH 300mA +/-0,3nH, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG18HN1N5S00D-M | SMD Spule 0603 1,5nH 300mA +/-0,3nH, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG18HN1N8S00D-M | Inductors 0603 Multilayer Type for Air-core Inductors, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG18HN22NJ00D-M | SMD-SPULE 0603 22NH 300MA 5%, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG18HN27NJ00D-M | SMD Spule 0603 27nH 300mA 5%, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG18HN2N2S00D-M | SMD Spule 0603 2,2nH 300mA +/-0,3nH, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG18HN2N7S00D-M | SMD Spule 0603 2,7nH, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG18HN33NJ00D-M | SMD-SPULE 0603 33NH 300MA 5%, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG18HN39NJ00D-M | SMD Spule 0603 39nH 300mA 5%, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG18HN3N3S00D-M | SMD Spule 0603 3.3nH 0.3nH, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG18HN3N9S00D-M | SMD-SPULE 0603 3,9NH 300MA, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG18HN47NJ00D-M | SMD Spule 0603 47nH 300mA 5%, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG18HN4N7S00D-M | SMD Spule 0603 4.7nH +/-0.3nH, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG18HN56NJ00D-M | Inductors 0603 Multilayer Type for Air-core Inductors, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG18HN5N6S00D-M | SMD-SPULE 0603 5,6NH 300MA, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG18HN68NJ00D-M | SMD Spule 0603 68nH 300mA 5%, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG18HN6N8J00D-M | SMD Spule 0603 6,8nH 300mA 5%, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG18HN82NJ00D-M | Inductors 0603 Multilayer Type for Air-core Inductors, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG18HN8N2J00D-M | SMD Spule 0603 8,2nH 300mA 5%, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQG18HNR10J00D-M | SMD Spule 0603 100nH 300mA 5%, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
LQH2HPN100MDRL-M | Inductors 1008 Wire Wound Type (Ferrite Core) for Power lines, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2HPN100MGRL-M | Inductors 1008 Wire Wound Type (Ferrite Core) for Power lines, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2HPN100MJRL-M | Inductors 1008 Wire Wound Type (Ferrite Core) for Power lines, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2HPN101MGRL-M | Inductors 1008 Wire Wound Type (Ferrite Core) for Power lines, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2HPN150MDRL-M | Inductors 1008 Wire Wound Type (Ferrite Core) for Power lines, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2HPN150MGRL-M | Inductors 1008 Wire Wound Type (Ferrite Core) for Power lines, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2HPN150MJRL-M | Inductors 1008 Wire Wound Type (Ferrite Core) for Power lines, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2HPN1R0MDRL-M | Inductors 1008 Wire Wound Type (Ferrite Core) for Power lines, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2HPN1R0MGRL-M | Inductors 1008 Wire Wound Type (Ferrite Core) for Power lines, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2HPN1R0NJRL-M | Inductors 1008 Wire Wound Type (Ferrite Core) for Power lines, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2HPN1R5MDRL-M | Inductors 1008 Wire Wound Type (Ferrite Core) for Power lines, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2HPN1R5MGRL-M | Inductors 1008 Wire Wound Type (Ferrite Core) for Power lines, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2HPN1R5NJRL-M | Inductors 1008 Wire Wound Type (Ferrite Core) for Power lines, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2HPN220MDRL-M | Inductors 1008 Wire Wound Type (Ferrite Core) for Power lines, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2HPN220MGRL-M | Inductors 1008 Wire Wound Type (Ferrite Core) for Power lines, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2HPN220MJRL-M | Inductors 1008 Wire Wound Type (Ferrite Core) for Power lines, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2HPN2R2MDRL-M | Inductors 1008 Wire Wound Type (Ferrite Core) for Power lines, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2HPN2R2MGRL-M | Inductors 1008 Wire Wound Type (Ferrite Core) for Power lines, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2HPN2R2MJRL-M | Inductors 1008 Wire Wound Type (Ferrite Core) for Power lines, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2HPN3R3MDRL-M | Inductors 1008 Wire Wound Type (Ferrite Core) for Power lines, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2HPN4R7MDRL-M | Inductors 1008 Wire Wound Type (Ferrite Core) for Power lines, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2HPN4R7MGRL-M | Inductors 1008 Wire Wound Type (Ferrite Core) for Power lines, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2HPN4R7MJRL-M | Inductors 1008 Wire Wound Type (Ferrite Core) for Power lines, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2HPN6R8MDRL-M | Inductors 1008 Wire Wound Type (Ferrite Core) for Power lines, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2HPNR47MDRL-M | Inductors 1008 Wire Wound Type (Ferrite Core) for Power lines, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2HPNR47MGRL-M | Inductors 1008 Wire Wound Type (Ferrite Core) for Power lines, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2HPNR47NJRL-M | Inductors 1008 Wire Wound Type (Ferrite Core) for Power lines, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2MCN100K02L-M | Inductors 0806 Wire Wound Type (Ferrite Core) for Choke (coating type), Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2MCN100M52L-M | Inductors 0806 Wire Wound Type (Ferrite Core) for Choke (coating type), Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2MCN120K02L-M | Inductors 0806 Wire Wound Type (Ferrite Core) for Choke (coating type), Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2MCN120M52L-M | Inductors 0806 Wire Wound Type (Ferrite Core) for Choke (coating type), Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2MCN150K02L-M | Inductors 0806 Wire Wound Type (Ferrite Core) for Choke (coating type), Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2MCN150M52L-M | Inductors 0806 Wire Wound Type (Ferrite Core) for Choke (coating type), Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2MCN180K02L-M | Inductors 0806 Wire Wound Type (Ferrite Core) for Choke (coating type), Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2MCN180M52L-M | Inductors 0806 Wire Wound Type (Ferrite Core) for Choke (coating type), Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2MCN1R0M02L-M | Inductors 0806 Wire Wound Type (Ferrite Core) for Choke (coating type), Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2MCN1R0M52L-M | Inductors 0806 Wire Wound Type (Ferrite Core) for Choke (coating type), Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2MCN1R5M02L-M | Inductors 0806 Wire Wound Type (Ferrite Core) for Choke (coating type), Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2MCN1R5M52L-M | Inductors 0806 Wire Wound Type (Ferrite Core) for Choke (coating type), Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2MCN220K02L-M | SMD Spule 0806 22µH 10%, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2MCN220M52L-M | Inductors 0806 Wire Wound Type (Ferrite Core) for Choke (coating type), Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2MCN270K02L-M | Inductors 0806 Wire Wound Type (Ferrite Core) for Choke (coating type), Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2MCN2R2M02L-M | Inductors 0806 Wire Wound Type (Ferrite Core) for Choke (coating type), Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2MCN2R2M52L-M | Inductors 0806 Wire Wound Type (Ferrite Core) for Choke (coating type), Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2MCN330K02L-M | SMD Spule 0806 33µH 10%, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2MCN390K02L-M | Inductors 0806 Wire Wound Type (Ferrite Core) for Choke (coating type), Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2MCN3R3M52L-M | Inductors 0806 Wire Wound Type (Ferrite Core) for Choke (coating type), Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2MCN470K02L-M | Inductors 0806 Wire Wound Type (Ferrite Core) for Choke (coating type), Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2MCN4R7M02L-M | Inductors 0806 Wire Wound Type (Ferrite Core) for Choke (coating type), Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2MCN4R7M52L-M | Inductors 0806 Wire Wound Type (Ferrite Core) for Choke (coating type), Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2MCN560K02L-M | Inductors 0806 Wire Wound Type (Ferrite Core) for Choke (coating type), Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2MCN680K02L-M | SMD Spule 0806 68µH 10%, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2MCN6R8M52L-M | Inductors 0806 Wire Wound Type (Ferrite Core) for Choke (coating type), Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2MCN820K02L-M | Inductors 0806 Wire Wound Type (Ferrite Core) for Choke (coating type), Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2MCN8R2M02L-M | Inductors 0806 Wire Wound Type (Ferrite Core) for Choke (coating type), Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2MPN100MGRL-M | Inductors 0806 Wire Wound Type (Ferrite Core) for Power line, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2MPN150MGRL-M | Inductors 0806 Wire Wound Type (Ferrite Core) for Power line, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2MPN1R0NGRL-M | Inductors 0806 Wire Wound Type (Ferrite Core) for Power line, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2MPN1R5NGRL-M | Inductors 0806 Wire Wound Type (Ferrite Core) for Power line, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2MPN220MGRL-M | Inductors 0806 Wire Wound Type (Ferrite Core) for Power line, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2MPN2R2MGRL-M | Inductors 0806 Wire Wound Type (Ferrite Core) for Power line, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2MPN330MGRL-M | Inductors 0806 Wire Wound Type (Ferrite Core) for Power line, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2MPN470MGRL-M | Inductors 0806 Wire Wound Type (Ferrite Core) for Power line, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2MPN4R7MGRL-M | Inductors 0806 Wire Wound Type (Ferrite Core) for Power line, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2MPN680MGRL-M | Inductors 0806 Wire Wound Type (Ferrite Core) for Power line, Muster Datenblatt | Murata | 10 | Muster anfordern |
|
|
LQH2MPN820MGRL-M | Inductors 0806 Wire Wound Type (Ferrite Core) for Power line, Muster Datenblatt | Murata | 10 | Muster anfordern |
Persönliche Beratung
Sie suchen einen Ansprechpartner in Ihrer Nähe?
Geben Sie hier Ihre Postleitzahl ein